Payment & Shipping Terms:
|Product:||Integrated Epoxy Resin Sink||Color:||Black, Grey|
|Sink Size:||L:500*W:400*H:300 Mm||Main Raw Material:||Epoxy Resin , Quartz|
|Thickness Option:||16, 19, 25 Mm||Usage:||Install On The Lab Table|
epoxy resin countertops,
epoxy resin benchtop
Integrated Chemical Resistance Epoxy Resin Sink With Laboratory Water Basin
2. Epoxy Resin Worktop Advantage
2.1. High temperature resistance:
The epoxy resin worktop will not cause bubble and crack when touching with high temperature in laboratory. It's suitable to be put into fume hoods with flaming electric stove for long time.
2.2. Super ability on chemical resistance within 24 days.
The material is inertia kind and it's with super ability for most of corrosive chemical reagent.
2.3. Moisture resistance absolutely
It doesn't contain any paper ingredients. It's suitable to be used in medicine and biology laboratory specially because it can control the growing for bacteria effectively such as SARS.
2.4. Safe and reliable:
It doesn't container any asbestine ingredients. It will not set free poisonous gas to influence the health of operator because it's not flammable and electric.
Our worktop is with combined body which will not dropping layer, expanding and cracking. The products can be repaired can recovered when the surface is scratched.
2.6igh cost performance
The performance of our worktop are almost same as imported products, but it's with low cost compared with imported products.
2.7 Nice appearance
Smooth surface, low reflection of light and easy to be cleaned
The main colour is black, gray and dark green. We can make any colour you specify if your quantity can reach our requirement.
3. Mian Laboratory Worktop Comparision
|Item and Worktops||Phenolic Resin||Epoxy Resin||Ceramic||Stainless Steel|
|Raw Material||Laminated by kraft paper and phenolic resin||Mixed by epoxy resin and quartz||Mixed by clay minerals||Steel|
|Thickness||12.7 mm||15,16,19,20,25 mm||20mm||1.0 mm|
|Ability to clean||OK||OK||OK||Good|
|Resistance to acid-base||OK||OK||Good||Good|
|Resistance to corrosion||resistance to corrosion of acid, alkali , solvent||resistance to corosion of acid, alkali, solvent||Good resisntace to corrosion of acid, alakli and solvent||normal resistanceto corrosion of acvid , alkali, solvent|
|Ressitance to pollution||OK||Good||Good||Good|
|Resistance to high temperature||OK||Good||Good||Color changed under high temperature|
|Resistance to impact||OK||OK||OK||Good|
|Ability to bearing||Good||Good||Good||Good|
|Ressitance to humidity||Good||Good||Good||Good|
|Resistance to Radio||Good||Good||Good||Fair|
|Physical Performance||solid||solid||solid and durable||It depends|
4. Standard Specification
|Fume Hood||Max Size||Thickness||Color|
|15,16,19, 20, 25mm||Black, Grey, Green, Blue, White|
|5 ft||1248* 645 mm||15,16, 19, 20, 25mm||Black, Grey, Geen, Blue, White|
|6 ft||1548* 645 mm||15, 16, 19, 20, 25mm||Black , Grey, Green, Blue , White|
Contact Person: John Huang